Outdoor LED Drivers — 15 models

Outdoor and landscape lighting puts three demands on a driver: sealed protection, stable continuous running, and tolerance to moisture and dust. Every model on this page uses a sealed aluminium housing with full potting and waterproof cable exits, so it can run for years in rain, gardens, in-ground fittings, wall washers and signage boxes. This page lists 15 suitable models: H03, H04, H10, H11, H15, H16, H18, H23, S02, S03, S04, S05, S06, S07, X04. Power coverage 10W–1500W, output 12V / 24V / 48V / 36V, protection IP67 / IP44 / IP20 / IP65, dimming DALI, 0-10V, Triac (phase-cut), Push dimming, Smart remote. Factory-direct from YFX in Shenzhen with a 3-year warranty and free samples.

How to choose for outdoor & landscape lighting

• Choose protection by exposureUse IP67 for open-air, in-ground and waterside positions; IP65 under eaves and semi-outdoor walkways; IP44/IP65 inside signage boxes.
• Look for full pottingA fully potted housing leaves no internal air gap, so moisture cannot condense inside — far more durable than gasket-only designs in humid climates.
• Leave 20%–25% headroomOutdoor luminaires often run all night. Keep the load at 75%–80% of the driver rating to cut temperature rise and extend service life.
• Prefer 24 V for long runsAt the same wattage 24 V halves the current and the voltage drop. Use 24 V above 5 m, and feed both ends or use thicker cable beyond 10 m.
• Fix and earth it properlyUse the moulded side mounting ears so the driver is not hanging by its cables; earth metal housings and provide drainage plus an access point for in-ground work.

Model comparison

Sizing tip: divide total luminaire wattage by 0.8 so the load stays at or below 80% of the driver rating; allow 20%–25% headroom where the installation runs for many hours. If you are unsure, send your luminaire data to +86 138 2356 2421 (call or WeChat) and our engineers will specify it free of charge.

All suitable models

• 
  H0360-400W · IP67
• 
  H0460-400W · IP67
• 
  H1060-350W · IP67
• 
  H1130-300W · IP67
• 
  H1530-600W · IP67
• 
  H1660-400W · IP67
• 
  H1860-300W · IP67
• 
  H23100-300W · IP44
• 
  S0260-400W · IP20
• 
  S0360-400W · IP67
• 
  S0410-50W · IP67
• 
  S05200-400W · IP67
• 
  S06600-1000W · IP67
• 
  S07400-1500W · IP20
• 
  X04200-1000W · IP65

Outdoor & Landscape Lighting FAQ

• 12 V or 24 V for outdoor strips?

  Prefer 24 V. At the same wattage the current is half that of 12 V, so voltage drop is smaller and brightness stays even from start to end. Models listed as 12V/24V support both options — confirm the luminaire voltage before ordering.
• Can an IP67 driver be submerged?

  IP67 means protection against temporary immersion under test conditions (typically 30 minutes at 1 m), not permanent underwater use. For in-ground and water-feature work, provide drainage and an access point; do not leave the driver standing in water.
• What is the warranty and service life?

  All models on this page are factory-direct with a 3-year free warranty and an average service life of more than 5 years in normal use. Keeping the load at 80% or less of the rating extends it further.
• Can cable length, connectors and non-standard wattage be customised?

  Yes. Outdoor projects often need custom output cable length, waterproof connectors, input cable gauge, non-standard wattage and housing size. Free samples are available for waterproofing and temperature-rise testing.

Related series and other applications