DALI & 0-10 V Drivers for Hotel and Commercial Projects — 17 models

Dimming in hotels, restaurants, retail chains and offices comes down to two things: protocol match and flicker-free deep dimming. The models here support DALI and 0-10 V, so they drop into building lighting systems with zone control, scene recall and smooth dimming. This page lists 17 suitable models: H01, H02, H03, H04, H05, H06, H07, H08, H09, H10, H11, H19, H20, K01, K02, K03, K04. Power coverage 10W–600W, output 12V / 24V / 48V / 9-48V / AC100-240V, protection IP20 / IP67 / IP50, dimming DALI, 0-10V, Triac (phase-cut), PWM, Push dimming, DIP-switch dimming. Factory-direct from YFX in Shenzhen with a 3-year warranty and free samples.

How to choose for hotel & commercial dimming

• DALI where you need addressingEach output can be addressed, grouped and assigned to scenes — ideal for guest rooms, ballrooms and multi-function spaces. Two-core signal wiring, low polarity concerns.
• 0-10 V where simple is betterLow cost, broad compatibility, easy commissioning; suits corridors, lobbies and open offices that do not need per-fixture addressing.
• Retrofits: check the wall firstIf existing walls have Triac dimmers, do not buy a DALI driver; a mismatch causes flicker, an inability to dim to the bottom, or a damaged dimmer.
• Deep dimming must be flicker-freeBallrooms and guest rooms often dim below 5%. Choose deep-dimming, low-ripple models so cameras do not catch banding.
• Project support and customisationNon-standard wattage, housing size, cable and interface options are available, with free samples for dimming compatibility and system commissioning.

Model comparison

Sizing tip: divide total luminaire wattage by 0.8 so the load stays at or below 80% of the driver rating; allow 20%–25% headroom where the installation runs for many hours. If you are unsure, send your luminaire data to +86 138 2356 2421 (call or WeChat) and our engineers will specify it free of charge.

All suitable models

• 
  H0160-400W · IP20
• 
  H0236-400W · IP20
• 
  H0360-400W · IP67
• 
  H0460-400W · IP67
• 
  H0560-300W · IP20
• 
  H06100-400W · IP20
• 
  H0760-600W · IP20
• 
  H0836-350W · IP50
• 
  H09100-350W · IP50
• 
  H1060-350W · IP67
• 
  H1130-300W · IP67
• 
  H1910-52W · IP20
• 
  H20 · IP20
• 
  K0130-400W · IP20
• 
  K0260-400W · IP20
• 
  K0360-400W · IP20
• 
  K0460-400W · IP20

Hotel & Commercial Dimming FAQ

• DALI or 0-10 V?

  Choose DALI for per-fixture addressing, scene presets and central management; choose 0-10 V for simple zone dimming on a budget or for retrofits. Both need an extra signal pair — neither runs off a wall Triac dimmer.
• Can it dim very low without flicker?

  Deep-dimming models go very low smoothly and without visible flicker. The exact minimum depends on dimmer quality and load, so we recommend testing a sample first.
• Does it work with hotel room control systems?

  Yes. DALI models connect to DALI-capable room controllers or the BMS; 0-10 V models connect through their 0-10 V interface. Send us the control system model so our engineers can confirm the interface.
• Do I need to rewire for a retrofit?

  If you keep the existing Triac dimmers and wiring, choose Triac drivers and no new cable is needed. Upgrading to a smart system means adding a signal pair (DALI or 0-10 V).

Related series and other applications